Thermal Grizzly Putty Advance 30g Thermal Paste - TG-P-A-030-R | 1350 EGP

Thermal Grizzly Putty Advance 30g Thermal Paste - TG-P-A-030-R

1350 LE
Availability: In Stock only 2 item left
shipped by (sigma)
Point: 10

Model : TG-P-A-030-R

Seller : sigma

Viewed : 33 items

Thermal Grizzly TG Putty Advance 30g - S-TG-P-A-030

  • Electrically non-conductive thermal putty – ideal replacement for traditional thermal pads

  • Designed for GPU modifications (not suitable for CPU or direct GPU die)

  • Fills gaps between 0.2 mm to 3.0 mm

  • Good thermal conductivity (Advance version)

  • Easy application using included spatulas or by hand (gloves recommended)

  • One 30g container is enough for most GPUs (e.g., GTX 1060 or RTX 4090 front side)

  • Operating temperature: -40°C to +120°C

  • Includes: 30g Thermal Putty Advance + 3x Spatulas


Thermal Grizzly Putty Advance 30g Thermal Paste - TG-P-A-030-R
TG Putty

Thermal Grizzly Putty is an electrically non-conductive alternative to traditional thermal pads, specifically designed for GPU modifications and the replacement of thermal pads between the PCB and the cooler.
Product number: S-TG-P-A-030
EAN: 4260711991202
MPN: S-TG-P-A-030

Product information "TG Putty - Advance"
TG Putty is an electrically non-conductive alternative to conventional thermal pads. As an easy-to-apply and flexible gap filler, it compensates for height differences, making it ideal as a replacement for thermal pads on GPUs. Graphics cards typically feature several types of thermal pads of varying thicknesses from the factory, requiring different pads during replacement or when converting the cooler to a GPU water cooler.

TG Putty can be applied using the included spatulas or by hand (gloves recommended). The spatula allows for broad application, while by hand, it can be shaped into small pellets tailored to the surface size (e.g., VRAM, SMD). TG Putty can fill height differences ranging from 0.2 to 3.0 mm.

TG Putty is available in three variants, primarily differing in their thermal conductivity:

  • TG Putty Basic: Medium thermal conductivity

  • TG Putty Advance: Good thermal conductivity

  • TG Putty Pro: Excellent thermal conductivity

For modifying a single, smaller graphics card without an active backplate (e.g., GeForce GTX 1060), approximately one 30-gram container of TG Putty is required. For larger graphics cards, such as a GeForce RTX 4090, one 30-gram container is generally sufficient for the memory (VRAM) and voltage regulators (VRM) on the front side. On the backside, there is often a uniform, larger gap between the PCB and the backplate on larger graphics cards. In this case, approximately two 30-gram containers are needed to completely fill this gap.

Notes:
TG Putty is not suitable for use on processors (IHS or Direct Die) or directly on the GPU die.

Before application, the target surface should be thoroughly cleaned and degreased, for example, using TG Cleaning Wipes or conventional isopropanol.

Scope of Delivery

  • Thermal Putty Advanced

  • 3x Spatulas

Operating temperature: -40°C to +120°C

CategoryAccessories
SubcategoryThermal Paste
Brandthermal grizzly
ModelTG-P-A-030-R